Generator Synchronisation Explained: MYSPAN Delivers Six 250 kVA Kirloskar Units

MYSPAN Power Solutions has delivered six 250 kVA Kirloskar diesel generators equipped with Deep Sea Electronics DSE8610 MKII controllers. These controllers support generator synchronisation and load sharing in correctly designed multi-generator installations.

The delivery highlights the importance of choosing suitable controls alongside generator capacity. For projects involving several units, the electrical design and operating sequence determine how the equipment works together.

Six Kirloskar Generators with DSE8610 MKII Controllers

The delivery included six Kirloskar diesel generator sets, each with a stated capacity of 250 kVA and a DSE8610 MKII controller.

These controllers provide capabilities for synchronised operation. However, the final system design determines whether the generators operate independently, in separate groups or together on a common electrical bus.

Explore our Kirloskar Legacy Series diesel generators to compare published models and power ratings.

What Is Generator Synchronisation?

Generator synchronisation prepares an incoming generator to connect to an energised electrical bus supplied by another compatible source.

Before connection, the system checks suitable voltage, frequency and phase conditions. After connection, load-sharing controls coordinate the contribution of the operating generators.

This allows multiple units to supply a common load within a properly engineered installation. However, fitting synchronising controllers alone does not complete the system. Compatible generator equipment, switchgear, protection and commissioning are also essential.

How Does the DSE8610 MKII Support Generator Synchronisation?

The DSE8610 MKII is a synchronising and load-sharing automatic start control module from Deep Sea Electronics.

Its capabilities include:

  • Synchronisation and load-sharing control.
  • Monitoring generator operating conditions.
  • Displaying equipment status and fault information.
  • Starting and stopping the engine according to configured load demand or fault conditions.

The controller forms part of the wider electrical control system. Therefore, engineers must confirm equipment compatibility, protection arrangements and settings for the intended application.

Why Consider a Multi-Generator System?

A multi-generator installation can provide flexibility when electrical demand changes.

For example, a suitably configured system can bring additional generators into operation as demand increases. When demand falls, it may stop selected units while the remaining generators support the load within their operating limits.

Maintenance planning is another consideration. Depending on the available capacity and system design, operators may be able to take one generator out of service while others supply the required equipment.

However, multiple units do not automatically provide redundancy. The engineering assessment must establish the capacity available when a generator is unavailable and identify which loads the remaining equipment can support.

Generator Synchronisation vs an Automatic Transfer Switch

A conventional open-transition Automatic Transfer Switch moves a load between available power sources, such as the utility supply and a standby generator. It disconnects one source before connecting the other.

In contrast, synchronisation prepares compatible sources for parallel operation. Load-sharing controls then coordinate their contribution to the connected load.

Some installations require both functions. As a result, buyers should define the intended operating sequence before selecting controllers and switching equipment.

Read our guide to how an Automatic Transfer Switch works for a closer look at automatic backup arrangements.

What Should You Confirm Before Selecting Generators?

Begin with an accurate description of the project’s electrical requirements.

Provide the following information when requesting a proposal:

  • Running load and significant motor-starting requirements.
  • Expected operating hours and required duty rating.
  • Number of generators intended to operate together.
  • Existing generator, controller and switchgear details.
  • Installation location and environmental conditions.
  • Requirements for reserve capacity and future expansion.

Also, clarify whether each quoted capacity refers to prime or emergency standby duty. Our guide to prime vs standby generator ratings explains why these ratings serve different operating requirements.

For broader selection guidance, read how to choose the right diesel generator in the UAE.

Planning Installation and Commissioning

A multi-generator project requires coordination between the equipment supplier, electrical designer and installation team.

Before commissioning, the responsible engineers should review the approved electrical drawings, control philosophy, protection requirements and equipment documentation.

The commissioning plan should then verify the intended operating sequence and system response under the specified test conditions.

For outdoor or enclosed installations, the review must also address ventilation, exhaust routing, fuel arrangements and maintenance access. These requirements remain important regardless of the controller’s capabilities.

Maintenance and Support After Delivery

Ongoing maintenance helps operators keep generating equipment ready for service.

Retain generator identification details, approved drawings, controller settings and commissioning records. These documents help technicians understand the installation and investigate future issues.

Our diesel generator maintenance checklist provides an overview of areas to include in a maintenance plan.

MYSPAN also provides genuine Kirloskar spare parts and generator service support for customers’ ongoing equipment requirements.

Discuss Your Power Requirements with MYSPAN

MYSPAN Power Solutions is the exclusive authorised Kirloskar distributor for MENA and CIS.

Whether you need a single generator or equipment for a multi-generator installation, share your load details, operating duty, installation location and control requirements with our team.

Request a generator quotation to discuss a configuration suited to your project.

Six 250 kVA Kirloskar diesel generators supplied by MYSPAN Power Solutions

Related Insights

Stay updated with the latest news, insights, and power solutions from MYSPAN.